Gold Member Since 2009
Audited Supplier

Qingdao CIMC Special Vehicles Co., Ltd.

Container, Container Chassis, Special Container manufacturer / supplier in China, offering Cimc 53FT Three Axle Gooseneck Skeleton Semi-Trailer with Twist Locks Truck Chassis, Cimc 45FT Yard Chassis (Bomb Cart) with Two Axles Truck Chassis, Cimc 4 Axles Low Flatbed Truck Trailer, 16m Lowbed Semi Trailer Truck Chassis and so on.

(/ )

Supplier Homepage Company Show Bulletin Board Fuel Tank Semi Trailer

Bulletin Board

Fuel Tank Semi Trailer [Nov 14,2012]
Fuel Tank Semi Trailer

The tank trailer is designed for use in stevedoring and transporting of diesel oil.


Length: 11, 800 mm
Width: 2, 485 mm (including mud guard)
Height: 3, 600mm unload
King Pin Location: 1, 000 mm from the front face of the front bolster (No confirm).
Axle spacer: 7, 400mm + 1, 400mm
Fifth Wheel Height: 1, 280mm with the chassis level (No confirm).
Landing Gear location: 2420mm behind the king pin location


Tare weight(Tolerance 0~-4%): Approximate 10, 800KG
Pay Load: 31, 700KG
G...V. W. R: 42, 500KG
King Pin Distribution: 16, 750KG
Axle Group Distribution: 26, 950KG

Running Gear

King Pin: 2" exchangeable king pin, supplier & type: JOST KZ1010.
Landing Gear: 2 speed road side winding with sand shoe. Lifting capacity 23T and static load 72T. Type: JOST A400, left operating.
Suspension: Single point suspension. 16 pieces Springs. Axle Trac: 1400mm.
Axles: 150x150 square axle with 15 tons capacity. Brake: S420x180, Wheel fitting 10xM22x1.5 ISO/ PCD335/281. Supplier & type: FUWA. Made in China...
Option: Supplier & type: YORK. Made in China. Option by Factory.
Rims: 9.0× 22.5, 10 Holes ISO, 8 pieces.
Tires: 12R22.5, 8 pieces. China Famous Brand. Option by Factory.
Brake System: Dual air brake system, WABCO relay emergency valve, none ABS brake system
Brake Chamber: 30/30 type on the rear axle, 30 type on the front axle
Electrical System: 24 volt lighting system with modular wiring harness, 7 pole plug
Tail/Stop light: Red.
Rear turn signal light: Amber
License light: White
Side Maker Lamp: Amber.


Volume: 35000LT + 5%, Vapor Volume for semi trailer
Three compartments: 2350L/20000L/15000L
Plus outside fitted fuel tank 2350L capacity situated inside the main tank at the front of the tank with proper inlet (16" diameter manhole) and outlet (a ball-type discharge valve and a thread coupling, made in China, lies to roadside. ).
Tank material: Steel plate Q345A, the thickness of the shell is 5mm approx.
Dish ends and bulkhead: Dished and flanged, steel plate Q345A, thickness are 5mm approx, and baffles are 4 mm approx, steel plate Q235A.
Shape of tank: Ellipse, double "D"
Plate dealing: Outer surface paint. Color according to the customer’s requirement. Internal antistatic coating.
Test pressure designed: 36kpa.

Tank Accessories and fitting:

16" diameter manhole pre compartment.
Each compartment has a 4" foot valve, pneumatic operation.
Each compartment has a 3" steel pipe line.
At the middle of the tank, each compartment with a 3" ball-type discharge valve and a male coupling (To be determined), lies to roadside.
At the rear of the tank, a detachable ladder is provided.
A chequered plate walkway is installed on top of the tank made of antiskid plate.
Each compartment has a measurement ruler. According to the regulation of Chinese metrology department, the measurement ruler for fuel tanker semitrailer should be calibrated above 70% of the tank volume and below 70% the ruler doesn’t need be calibrated. From 70% to 85% of the tank volume, we can calibrated the ruler and it can reach 300 liter/step. And above 85% of the tank volume, we can make the precision of the measurement ruler reach 100 liter/step. (calibrated by CIMC)
Expansion valve: Non.
Without Pump